erk610 ? ceramic ac capacitors ? class x1, 440v ac/class y2, 300vac typical applications construction technical data for worldwide use as electromagnetic interference suppressor in all x1 and y2 applications. disc capacitors with epoxy coating. epoxy dipped, insulating, ? ame retarding according to ul 94v-0. x1 y2 x1 y2 x1 y2 rated voltage u r 440 vac, 50 hz 300 vac, 50 hz (iec 60384-14.2) (iec 60384-14.2) (iec 60384-14.2) capacitance range 33-4700 pf capacitance tolerance 10%, 20% temperature range (-40 to +125)c climatic category iec 40/125/21 climatic category iec 40/125/21 climatic category approvals vde, ul, csa dissipation factor tan 25 ? 10 -3 test voltage between component test: terminals 2600 vac, 50 hz,2 s as repeated test admissible only once with 2340 vac, 50 hz,2 s random sampling test (destructive test): 2600 vac, 50 hz,60 s dielectric strength of 2600 vac, 50 hz,60 s (destructive test) body insulation insulation resistance 6 ? 10 9 ? taping and special lead on request con? gurations statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applic ations, but are not intended to constitute and we specifically disclaim any warranty concerning suitabi lity for a specific customer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice in ferred from this inform ation or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the ad vice given or results obtained.
article table approvals/reference documents certi? cation body speci? cation approval reference vde en 132400 40001991, 40001992 ul ul 1414 (u r = 250 vac) e73869 csa c 22.2 no. 1-m90 (u r =250 vac) 216038 (cul recognition) ordering information article code 1st block 2nd block see article table see separate brochure: pos. 13 capacitance tolerance code: ceramic disc, emi and safety capacitors, m = 20% standard general information k = 10% option page 5 see article table and page 19 in the evox rifa film capacitors 2003 catalogue. for options, see ceramic disc, emi and safety capacitors, general infor mation, page 5. packing the box dimensions for bulk packaging are 245 x 145 x 80 mm. quantity/package as per article table. reels with taped capacitors are packed 10 in a box with dimension 370 x 370 x 560 mm. quantity/reel according to article table. the standard quantity/reel is for 360 mm reel. if 500 mm reel is required, it must be speci? ed when ordering and the quantity is 2 x the given quantity. marking 2.2 nf to 4.7 nf 33 pf to 1.5 nf all approval marks are also shown on the label. data sheet erk610 speci? cations subject to change without notice ? kemet erk610 capaci- dimensions tance d x s max p1* d0.05* v0.5* article code ceramic pf (mm) (mm) (mm) (mm) 1st block dielectric 33 8.0 x 6.0 7.5 0.6 1.6 erk610rk2330m n 750 47 8.0 x 6.0 7.5 0.6 1.6 erk610rk2470m n 750 68 8.0 x 6.0 7.5 0.6 1.9 erk610rk2680m k 1200 100 8.0 x 6.0 7.5 0.6 1.9 erk610rk3100m k 1500 150 8.0 x 6.0 7.5 0.6 1.9 erk610rk3150m k 2000 220 8.0 x 6.0 7.5 0.6 1.9 ERK610RK3220M k 2000 330 8.0 x 6.0 7.5 0.6 1.9 erk610rk3330m k 2000 470 8.0 x 6.0 7.5 0.6 1.9 erk610rk3470m k 4000 680 9.0 x 6.0 7.5 0.6 2.0 erk610rk3680m k 4000 1000 7.0 x 4.5 7.5 0.6 1.6 erk610rk4100m k 6000 1500 8.0 x 4.5 7.5 0.6 1.6 erk610rk4150m k 6000 2200 10.0 x 4.5 7.5 0.6 1.6 erk610rk4220m k 6000 3300 11.5 x 4.5 7.5 0.6 1.6 erk610rk4330m k 6000 3900 14.0 x 4.5 7.5 0.6 1.6 erk610rk4390m k 6000 4700 14.0 x 4.5 7.5 0.6 1.6 erk610rk4470m k 6000 * standard lead con? guration, other lead spacing and diameter available on request. erk 440~x1 300~y2 33p m erk 2n2 m iec 384-14/2 440 300 250~ x1 y2 c ? us erk erk statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applic ations, but are not intended to constitute and we specifically disclaim any warranty concerning suitabi lity for a specific customer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice in ferred from this inform ation or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the ad vice given or results obtained.
|
